AMD NANO-TECH P2 Particulate Respirator Masks T4H | Headband (Box of 50)

*Discontinued Product* Superseded by the AMD NANO-TECH P2 Particulate Respirator Masks N4HS | Headband Available here now. Same day dispatch for all order placed before 12PM AEST.

AMD NANO-TECH P2 Particulate Respirator Masks are proudly made in Australia, for Australians. Featuring 4 protective layers, with NANO-TECH at its core, every AMD P2 mask is designed with the most advanced filtration technology. This is what allows for better all day comfort, breathability and safety with far superior longevity, compared to competitor products. The AMD NANO-TECH P2 Particulate Respirator Masks T4H | Headband is no different. It couples the breathability and comfort that you know and love from the AMD P2 T4 earloop with a dual set of headbands and additional nose foam support across the nose bridge.

With 4 protective layers, AMD P2 masks are designed to keep atmospheric contaminants such as silica dust, bushfire smoke and other harmful airborne particles and aerosols out. The nanofibre technology contained within AMD masks filters out 99.66% of airborne particles as tested by VICLAB (BSI) 17.7.20 compared to approximately 60% for many imported masks. This 99.66% Particle Filtration Efficiency (PFE) is accompanied by a 99.92% Bacterial Filtration Efficiency (BFE) AS 4381 Level 3. You can learn more about AMD mask lab test results here.   

At Australian P2 Mask, we supply only the best PPE solutions for both home and the workplace. Through our own comparisons between the AMD NANO-TECH P2 Particulate Respirators T4 and similar products that are easily found in Chemist Warehouse or Bunnings, the AMD P2 respirators are far superior for the following reasons:

Technology: Nano-filters, comprised of nanofibers, deliver higher filtration efficiency than standard melt blown filters. They’re lighter and more breathable. They also maintain their functionality after exposure to moisture while typical filters lose their electrostatic properties once exposed to water. AMD’s nano-filters are water resistant and protective against airborne particles, aerosols, and liquid. Each individual AMD P2 mask features level 3 fluid resistance.

Fit: Innovative three panel design fits naturally around the nose and mouth creating a better seal and aesthetic. Elastic headbands hold the respirator securely in place. A soft inner layer and mouldable padded nose bridge wire provide extra comfort.

Comfort: AMD Nano-filter respirators are lighter than standard respirators and allow enhanced breathability which in turn, allow them to be worn for hours on end. While most melt-blown mask products will lose their effectiveness within the 4-6 hour range, AMD P2 respirator masks have shown to last for up to 24 hours without degradation. The three panel design unfolds to shape naturally around the face maximising ventilation around the nose and mouth while still maintaining an effective seal to the environment. Nano-filter respirators are potentially viable options for populations with breathing restrictions such as the elderly and those with heart and lung conditions.

Packaging: Each nano-filter respirator is individually packaged for hygiene and designed to fold flat to facilitate portability and storage. Individual wrapping makes it convenient to carry and distribute without contamination. Every box contains 50 individual masks.

Instructions For Use

Wash hands for at least 20 seconds with soap and water or with alcohol-based hand sanitiser prior to touching the AMD P2 T4H headband respirator. Take care not to touch the inner layer that will be in contact with the nose and mouth when unpacking and whilst donning. Check for defects such as tears or broken headbands. Position the label side out and orient the respirator so that the nose bridge wire is at the top.

Straps should separate when panels are opened. Position the label side out and orient the respirator so that the nose bridge wire is at the top. Ensure the bottom panel is open and secured beneath the chin. Pull the top strap over your head and position it high on the back of your head. Pull the bottom strap over your head and position it around the neck and below the ears. Adjust for a comfortable fit by pulling the top panel toward the bridge of the nose and bottom panel under your chin.

Mould the nose bridge wire to the bridge of the nose to secure the respirator to your face. Place your fingertips from both hands at the top of the metal nose strip. Using two hands mould the nose area to the shape of your nose by pushing inward while moving your fingertips down both sides of the nose strip. Perform a user seal check prior to each wearing. To check fit, cover the middle panel with one or both hands before inhaling and exhaling slowly. Be careful not to disturb the position of the AMD P2 respirator. If air leaks around the nose, readjust the nose strips as described above. If air leaks around the respirator edges, adjust panels and straps. For best results, we recommend all tight fitting P2 respirators to be fit tested via quantitative fit testing method at service providers such as SafetyCo as per AS/NZS 1715:2009. 

*Avoid touching the respirator while wearing; if touched, wash hands with soap and water or an alcohol-based sanitiser. 

*Replace respirator if it becomes obviously contaminated; never reuse single-use respirators.

Removing The Respirator

Wash hands with soap and water or alcohol-based hand sanitiser prior to removing the respirator. Pull the bottom strap over the head. Maintain a hold on the first strap. Use another hand to pull the top strap over the head. Take care to not touch the front of the respirator which might have become contaminated. Dispose as per local policy & procedure.

Extended Product Information